|
|
|
Removing
the cover
To
remove the cover:
- If you are
replacing a non-hot-swap component, turn off the HMC and all attached
devices. Then, disconnect all power cords and external cables.
- Unlock the
side cover.
- Press the
cover-release latch down, as indicated by the two arrows on the
latch. Then tilt the top of the side cover away from the chassis.
- Lift the
side cover off the HMC and set it aside.
- If you are
instructed to return the side cover, follow all packaging instructions,
and use any packaging materials that are supplied to you for shipping.
|
|
|
|
|
|