|
|
|
Removing
the simple-swap hard disk drive
To remove the
simple-swap SATA hard disk drive:
- Turn off
the HMC and peripheral devices and disconnect all power cords.
- Unlock the
side cover. The side cover does not need to be removed.
- Remove the
lower bezel. (Refer to Removing
and Replacing the Lower Bezel.)
Start
the video ...
- Pull the
loops of the drive assembly that is to be removed toward each
other. Then pull the assembly out of the bay.
- If you are
instructed to return the drive assembly, follow all packaging
instructions, and use any packaging materials supplied to you
for shipping.
|
|
|
|
|
|