|
|
|
Removing the cover
To remove the cover:
- If you are replacing a non-hot-swap component, turn off
the HMC and all attached devices. Then, disconnect all
power cords and external cables.
- Unlock the side cover.
- Press the cover-release latch down, as indicated by the
two arrows on the latch. Then tilt the top of the side
cover away from the chassis.
- Lift the side cover off the HMC and set it aside.
- If you are instructed to return the side cover, follow
all packaging instructions, and use any packaging materials
that are supplied to you for shipping.
|
|
|
|
|
|