|
Removing
the memory module (DIMM)
To remove the
memory module (DIMM):
- Turn off
the HMC and peripheral devices and disconnect all power cords.
- Unlock and
remove the cover. (Refer to Removing
and Replacing the Cover.)
- Disconnect
any cables that impede access to the DIMMs.
- Locate the
DIMM connector that contains the DIMM that is to be replaced.
Refer to Model 7042-C06
HMC Features - System-board Optional Connectors for
an illustration of the DIMM slot locations.
- Open the
retaining clips on each end of the DIMM connector.
Attention:
To avoid breaking the retaining clips or damaging the DIMM connectors,
open and close the clips gently.
- Lift the
DIMM out of the connector.
- If you are
instructed to return the DIMM, follow all packaging instructions,
and use any packaging materials supplied to you for shipping
.
|